View source for Template:Infobox connector/testcases

{{testcase table
|name=D4 Video connector
|image=[[Image:SCART_20050724_002.jpg|150px]]
|logo=[[Image:D4_connector.png|150px]]
|caption=This example is not factual - it is purely illustrative of the infobox.
|type=[[analog electronics|Analogue]] video connector
|designer=Some guy
|design_date=Early 1990s
|manufacturer=Initially [[Toshiba]]
|production_date=Early 1990s to 2005
|superseded=[[RF connector]]
|superseded_by=[[DVI connector]]
|superseded_by_date=2005
|external=External
|hotplug=Yes
|length=36 mm (typical)
|width=25 mm
|height=6.5 mm
|electrical=220 volts AC 50 Hz typically
|earth=Dedicate pin
|maximum_voltage=450 volts peak
|maximum_current=20 amps at 220 volts, 5 amps at 400 volts
|audio_signal=None
|video_signal=[[analog signal|Analogue]] [[480i]], [[480p]], [[720p]], [[1080i]]
|data_signal=Resolution and [[Aspect ratio]] only
|data_bit_width=2 bits
|data_bandwidth=120 bit/s
|data_devices=1 
|data_style=[[Serial communications|Serial]]
|physical_connector=DB-25
|cable=14 core shielded (25 m max)
|passband=0-20&nbsp;GHz
|num_pins=14 (6 video, 3 reserved, 2 detect, 3 data)
|pinout_image=[[Image:D4 connector.png|300px]]
|pinout_caption=A male connector seen from the front.
|pinout_col1_name=Spec name
|pinout_col2_name=Example col title
|pin1=[[Luminance (video)|luminance]] (0.7 V, 75 Ω)
|pin1_name=Y
|pin2=Y [[Ground (electricity)|ground]]
|pin2_name=Y GND
|pin3=0.35 V, 75 Ω
|pin3_name=Pb
|pin4=
|pin4_name=Pb GND
|pin5=0.35 V, 75 Ω
|pin5_name=Pr
|pin6=
|pin6_name=Pr GND
|pin7=Reserve link 1
|pin7_name=
|pin8= 0&nbsp;V = 525 lines<br> 2.2 V = 750 lines<br> 5&nbsp;V = 1125 lines
|pin8_name=Data line 1 
|pin9=0&nbsp;V = 59.94i / 60i<br> 5 V = 59.94p / 60p
|pin9_name=Data line 2 
|pin10=Reserve link 2
|pin10_name=
|pin11=0&nbsp;V = 4:3 <br> 2.2&nbsp;V = 4:3 letterbox <br> 5&nbsp;V = 16:9
|pin11_name=Data line 3 
|pin12=
|pin12_name=Plug insert detect ground
|pin13=Reserve link 3
|pin13_name=
|pin14=output 10 kΩ, input > 100 kΩ
|pin14_name=Plug insert detect 
|pin_custom1_name=Hooks
|pin_name_custom1=GND
|pin_custom1=Shell ground
|pinout_notes=These are some notes about the pinout of this connector. The pins are razor sharp.
}}